Canadian Nuclear Society
International CANDU Maintenance Conference
Select Conference Type to see its Papers
OR
Use the search to search the whole database
| Conference | Year | Title | Author | Location |
|---|---|---|---|---|
| 3rd International CANDU Maintenance Conference | 1995 | Using the Time Domain Reflectometer to Check for and Locate a Fault | "M. Ramphal, E. Sadok" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Development and Implementation of the Bruce B Secondary Side Flow Accelerated Corrosion Program | D.E. Stephenson (OH) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | RCM: The Bruce B Experience | "E.S. Hill (NUS Corp, USA), E.K. Doyle (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Darlington NGD Preventive Maintenance Enhancement Program | D.J. Phillips (OH) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Bruce NGS A Unit 4 Preheater Divider Plate Failure | "M. Langridge, D. Mclnnes (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Relief Valve Failure on Pickering Unit 2 | R. Goodman (OH) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Non-Intrusive Downcomer Flow Measurements: A Means of Monitoring Steam Generator Performance | "C.E. Taylor, J.E. McGregor, C.A. Kittmer, M.J. Pettigrew (AECL), E.F. Jelinski, D.A. Seppala (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Darlington Steam Generator Life Assurance Program | "E. Jelinski, M. Dymarski, C. Maruska, E. Cartar (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Corrosion-Product Inventory: The Bruce-B Secondary System | "J.A. Sawicki (AECL), J. Price, M.E. Brett (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Portable Radiation Instrumentation Traceability of Standards & Measurements | "A. W~seman, M. Walke (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | "The Role of a Certified Calibration Laboratory in a Station's Measuring and Test Equipment Calibration, Repair, and Documentation Program" | "K. Ebenstreit, N. Maclntosh (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Portable Digital Electronic Radiography System | B. Sawicka (AECL) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Air Operated Valve Maintenance at Bruce 'A' | K. McLeod (OH) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Implementation Challenges of a Motor Operated Valve Program | T.L. Ferguson (OH) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Darlington NGD Liquid Injection Shutdown System (LISS) Valve Performance | "M. Wightman, F. Amantea, B. Speer, A. Rouhi (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Fuel Channel Replacement Experience at Wolsong Unit 1 | "B.S. Han (KEPCO), M.M. Cobanoglu (AECL)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Removal of a Seized Fuel Channel from the Kanupp Reactor | "W. Butt (KANUPP), R. Gunn (AECL)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | "Wet Scrape Sampling Campaign: Bruce 'B' Unit 6, Spring '95" | S. Bennett (OH) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Gentilly 2 Divider Plate Replacement | "J. Forest (HQ), E. Kiisel, G. McClellan, W. Schneider (BWC)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Recent Developments in Plugging of Steam Generator Tubes | "S. Buhay, R.C. Abucay (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Maintenance and Environmental Qualification | "R.S. Martin (United Energy Services Inc.), D.G. Austin (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | "Environmental Qualification - Walkdowns: The Documentation of Configuration Information for Safety Related Components, Equipment and Systems" | J. Melmer (OH) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Environmental Qualification Program for Wolsong Project | "A. Duggal, H. Johal, F. Yee (AECL), S.K. Suh (KAERI)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | "Validation of the Dynamics of SDS and RRS Flux, Flow, Pressure and Temperature Signals Using Noise Analysis Techniques" | "0. Glockler, D.F. Cooke, M.V. Tulett (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Portable System for Reactor Noise Data Acquisition | "S.T. Craig, P.D. Tonner, J.P. Johnston, L.E. Nicholson (AECL), 0. Glockler, D. Williams (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Flow-Accelerated Corrosion in Nuclear Power Plants: Application of Checworks at Darlington | "C. Schefski, J. Pietralik (AECL), T. Dyke, M. Lewis (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | A Requirements Checklist for the Replacement of Analog Fischer and Porter Process Controllers with New Digital Models | A. Beauchamp (AECL) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Upgrading from the Dicon Wiring Management System to IntEC at the Gentilly 2 Station | P. Theoret (HQ) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Operating Experience in Engineering and Instrumentation & Control Areas Regarding a Candu 600 Refuelling System | "E. Binetti et al, (Nucleoelectrica, Argentina)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Slarette Operations at Candu 6 Stations | D.J. Burnett (AECL) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Design of the Minislar System for Bruce A | M.G. Gray (GEC) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Advanced Slarette Delivery Machine | R.R. Bodner (AECL) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Fuel Channel Conditions Encountered During Slar and the Implications on Slar Strategies | "J. Gierlach, M. Furniss (OH), P. Gauthier (HQ), P. Ahearn (NBP)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Water Lancing of Bruce-A Unit 3 and 4 Steam Generators | "F. Puzzuoli, B. Murchie, S. Allen (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Steam Generator Waterlancing at DNGS | "D. Seppala (OH), E. Kiisel, F. Kamler (BWC), J. Malaugh (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Steam Generator Secondary Side Chemical Cleaning at Point Lepreau using the Siemens High Temperature Process | "K. Verma, C. MacNeil (NBP), S. Odar, K. Kuhnke (Siemens)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Pickering Unit 1 Chemical Cleaning | "J.L. Smee (Niagara Technical Consultants), R.J. Fiola (BWC), K.R. Brennenstuhl, D.D. Zerkee, C.M. Daniel (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Elastodynamic Spot Testing - Assessing Serviceability of Aging Elastomer Parts | "0. Gracie, R. Metcalfe, R. Wensel (AECL)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Check Valve Diagnostic Program at Bruce A | S. Marsh (OH) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | The Role of Lubricant Analysis in Maximizing Lubricant and Equipment Life | J. Janis (OH) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Condition Based Maintenance Pilot Projects at Pickering ND | "R.T. Zemdegs, F.K. Fitzsimmons (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | PND Fuel Handling Decontamination Program: Specialized Techniques and Results | "R. Pan, K. Hobbs, M. Minnis, K. Graham (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Decontamination and Recovery of Materials at Nuclear Facilities - Operating History | "P.J. Gillis (Non-Destructive Cleaning Inc), J. Ackeroyd (J. Ackeroyd & Assoc)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Rehabilitation Activities and Radiation Protection Requirements in a Candu Facility | "J.K. Mohindra, D. Papavramidis, I. Lake (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Gentilly 2 Digital Control Computer Maintenance Strategy | "P. Meloncon, J. Hubert, N. Gour (HQ)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Evaluation of Candu Safety-System Calibration Accuracy Through Monitoring | "H.W. Hinds (AECL), R. MacKay (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Point Lepreau NGS RTD Cable Assembly Failure & Replacement Program | M.P. Callister (NBP) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Fuel Channel In-Service Inspection Programs - Program Design for Maximum Cost Effectiveness | N. van den Brekel (OH) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Fuel Channel Life Limiting Factors that Dictate Fuel Channel Maintenance Requirements | "P.J. Richinson, H.W. Wong (AECL), P.J. Ellis (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | "New Concepts, Requirements and Methods Concerning the Periodic Inspection of the Candu Fuel Channels" | "J.R. Denis (OH), M. Soare (INR)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Transmit-Receive Eddy Current Probes for Defect Detection and Sizing in Steam Generator Tubes | "L.O. Obrutsky, T. Harasym, V.S. Cecco and S.P. Sullivan (AECL)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Ultrasonic Inspection of Electrosleeved Steam Generator Tubing | "D.P. Jansen, M.D.C. Moles, W.K. Chan, H.D. Mair, E.I. Choi (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Eddy Current Technique for Detecting and Sizing Surface Cracks in Steel Components | "V.S. Cecco, J.R. Carter, S.P. Sullivan (AECL)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Primary Heat Transport Pump Mechanical Seal Replacement Strategy for Pickering B | V. Chacinski (OH) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Upgrading Primary Heat Transport Pump Seals | "T. Graham, R. Metcalfe, D. Rhodes (AECL), D. Mclnnes (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Inflatable Door Seals - Reduced Maintenance and Longer Service-Life | "S. Kuran, R. Wensel (AECL), M. Lazic (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | The Development of a Station Maintenance Strategy | "F. Fitzsimmons, R. Bearton, T. Andreeff (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Atomic Energy Control Board (AECB) Staff Assessment and Views of Current Maintenance Practices at a Four Unit Candu Plant | I. Malek (AECB) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Peer Evaluation Experience with Maintenance Program Evaluation | "F. Saunders, M. Gerard (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Control Valve Friction Operational Experience at Darlington NGD | B. Speer (OH) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Darlington NGD Valve Packing Program | C. Spence (OH) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | BNGS B Valve Packing Program | D. Cumming (OH) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Mobile Robotics for Candu Reactor Maintenance: Case Studies and Near-Term Improvements | "M.G. Lipsett (AECL), K.H. Rody (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Ring Thermal Shield Piping Modification at Pickering Nuclear Generating Station 'A' Unit 1 | "R. Brown (OH), M.M. Cobanoglu (AECL)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | ARK-2: A Mobile Robot that Navigates Autonomously in an Industrial Environment | "N. Bains (AECL), S. Nickerson, D. Wilkes (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | "Underwater Fuel Handling Equipment Maintenance Verification of Design Assumptions, Specific Problems and Tools, Case Study" | J. Kurek (OH) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Ultrasonic System for High-Accuracy Thickness Measurement of Fuel Bundie Bearing Pads and Shield Plug Crimps | "P. Ciorau, B. Bevins, L. Gilham (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Darlington NGD Fuel Handling Head Eight Acceptance Program | "P.H. Skelton, T. Sie (OH), J. Pilgrim (GEC)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | "Improved Reliability, Maintainability and Safety Through Elastomer Upgrading" | "R. Wensel, K.C. Wittich (AECL)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Status of the Reliability Centered Maintenance Program at Ontario Hydro's Bruce 'A' Nuclear Division | I. Khan (OH) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Information Management for Maintenance of Instrument Calibration Data | Y. Tam (OH) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Bruce Unit 2 Lay-Up Engineering Assessment | D. Iley (OH) | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Effective Utilization of Maintenance Staff in Design and Implementation of Major Project Work | "D. Wyman, J. Dingle, R. Brown (OH)" | Toronto |
| 3rd International CANDU Maintenance Conference | 1995 | Research on Nondestructive Examination Methods for Candu Fuel Channel Inspection | "M. Soare, F. Petriu, V. Toma, V. Revenco, A. Calinescu, R. Ciocan, C. Iordache, L. Popescu, M. Mihalache, C. Murgescu (INR)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Computer-Based Protective Relaying Maintenance Program | L. Siekierski (OH) | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | CANDU Digital Control Computer Upgrade Options | "M. de Jong, J. de Grosbois, T. Qian (AECL)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Human Performance Monitoring and Improvement at Pickering | M. Reid (OH) | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | How and When Will Self-Evaluation Improve Maintenance of CANDU Plants? | K. Mika (OH) | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Steam Generator Leak Detection at Bruce A Unit 1 | "K. Maynard, V. Singh, D. McInnes (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Acoustic Tool for Leak Inspections in Steam Generator Divider Plates | "J. Kowalewski, P. Maak, M. Colbert, R. Black, K. Yiu (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Validating Eddy Current Array Probes for Inspecting Steam Generator Tubes | "S. Sullivan, V. Cecco, L. Obrutsky, J. Lakhan, A. Park (AECL)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Eddy Current and Ultrasonic Fuel Channel Inspection at Karachi NPP | "W. Mayo (AECL), M. Alam (PAEC)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Detailed Simulation of Ultrasonic Inspections | "K. Chaplin, S. Douglas, D. Dunford, L. Lo, C. Daza (AECL)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Improving the Reliability of Stator Insulation System in Rotating Machines | "B. Gupta, H. Sedding, I. Culbert (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Retrofit of AECL CAN6 Seals into Pickering Shutdown Cooling Pumps | "D. Rhodes, R. Metcalfe (AECL), G. Brown, P. Kiameh, P. Burchett (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Improved Operation In CANDU Plants With CAN8 PHT Pump Seals | "T. Graham, D. Rhodes (AECL), D. McInnes (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Darlington Station Outage - A Maintenance Perspective | "J. Plourde, J. Marczak, M. Stone, R. Myers, K. Sutton (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Ice Plugs at Darlington Nuclear Generating Station: Teamwork In Action | D. Creates (OH) | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Removal & Replacement of a Feeder Tube from a CANDU Reactor | "C. Holmes, D. Pink (BW), P. Ahearn (NBP)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | CHECWORKS Integrated Software for Corrosion Control | "C. Schefski, J. Pietralik (AECL), T. Hazelton, V. Bitonte (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Service Water Systems Management using CHECWORKS | T. Gendron (AECL) | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Thermal Efficiency Improvements - An Imperative for Nuclear Generating Stations | "S. Hassanien, S. Rouse (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Advanced Materials Characterization for Predicting the Intrinsic Cracking Susceptibility of Nuclear Components and Optimizing System Maintenance Strategies | "G. Palumbo, P. Lin, E. Lehockey, F. Smith, P. Lichtenberger (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | The Application of Operating Deflection Shape Analysis to Resolve Structural Vibration Problems | "E. Horton, B. Alavi, R. Zemdegs (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | SO8: Investigation and Repair of a Cracked Feeder at Point Lepreau | "A. Celovsky, T. Gendron, M. Wright, S. Usmani (AECL), J. Slade (NBP)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Optical Technologies for Measurement and Inspection | D. Mader (OH) | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Modeling the Vibration of Fuel Channels and Adjuster Units in CANDU Reactors to Support In-Core Flux Detector Noise Analysis | "D. Derksen, D. Chidley (AECL), B. Smith, O. Glockler (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Darlington NGS A: SGECS Condensation Induced Waterhammer Analysis and SGECS Hot Commissioning Test | "C. So (AECL), P. Chang, D. Meranda (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Maintenance Recovery at Pickering | "J. Coleby, R. Zemdegs (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | "Implementation of, and Lessons Learned from Work Management Process and Organizational Structure Improvements at Pickering" | "S. Seedhouse, D. Hunter, T. Chong (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Valve Packing Manual: A Maintenance Application Guide | "J. Aikin (AECL), R. McCutcheon, D. Cumming, C. Spence (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Packing Configuration Performance for Small Diameters Stem | "J. Aikin, A. Eyvindson (AECL), C. Spence, D. Cumming (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Recommended AOV Diaphragm Replacement Frequencies | K. McLeod (OH) | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Remote Tube Sample Removal from CANDU Steam Generators | "C. Holmes (BW), D. Cislo (Framatome Technologies), S. Plante (HQ)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Electrosleeve Process for In-Situ Nuclear Steam Generator Repair | "R. Barton (OH), T. Moran (Framatome Technologies), E. Renaud (BW)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Zero-Reinforcement Vessel Closures | "G. McClellan, Y. Mou (BW)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Pipe Support Program at Pickering | "L. Sahazizian, Z. Jazic (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Non-Intrusive Check Valve Diagnostics at Bruce A | S. Marsh (OH) | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Pickering Tool Management System | "A. Green, E. Wong (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Continuous Monitoring of Steam Generator Performance using Non-Intrusive Downcomer Flow Measurements | "C. Taylor, J. McGregor, C. Kittmer (AECL)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Replacement Divider Plate Performance Under LOCA Loading | "W. Schneider, G. McClellan (BW), H. Huynh (HQ)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Steam Generator Primary Side Fouling Determination Using Oxiprobe Inspection Technique | "F. Gonzalez, R. Dyck, A. Brennenstuhl, G. Palumbo (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Laboratory Tests of a Modified He-3 Detector for Use with Startup Instrumentation | "T. Qian, P. Tonner, N. Keller (AECL), W. Buyers (NRCC)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | "Self-Heating, Gamma Heating and Heat Loss Effects on Resistance Temperature Detector (RTD) Accuracy" | "T. Qian, W. Hinds, P. Tonner (AECL)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Sending More Process Data Without Additional Cables | "H. Licht, R. Roicha, M. Rodych (AECL)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Nondestructive Elemental Analysis of Corrosion and Wear Products from Primary and Secondary CANDU Water Circuits | B. Sawicka (AECL) | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Primary Side Crud Sampling and Characterization: How It May Help to Better Maintain CANDU Reactors | "J. Sawicki, B. Sawicka (AECL), M. Dymarski (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Reliability Centred Maintenance (RCM) Living Program | "I. Khan, R. Aumell (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Infrared Thermography Program at Darlington | B. Speer (OH) | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Upgrading Inflatable Door Seals | "T. Sykes, R. Metcalfe, L. Welch (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | RTD Problems at Darlington | "D. McAllindon (AECL), D. Sloan, P. Mayer (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Shielding and Filtering Techniques to Protect Sensitive Instrumentation from Electromagnetic Interference Caused by Arc Welding | W. Kalechstein (AECL) | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Application of the ALARA Principle to the Bleed Condenser Relief Valve Replacement Project | "T. Wong, J. Kroft (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Controlling Radiation Fields in CANDU Reactors using Chemical Decontamination Technologies | "D. Miller, D. Guzonas, R. Speranzini (AECL), R. Laporte (HQ), T. Dereski (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Dosimetry Results for AECL Personnel Involved in Maintenance Activities at Off-Shore CANDU Stations | R. Khaloo (AECL) | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Development and Implementation of the Pre-Job Briefing Process for Maintenance Work at Pickering | A. Farrell (OH) | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Control Maintenance Training Program for Special Safety Systems at Bruce B | "T. Zettel, G. Reinwald (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Development of an Improved Low Profile Hub Seal Refurbishment Tool | L. Wagg (AECL) | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Strategies for Accelerating the SLARette Process | P. Grewal (AECL) | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | The Structural Aging Assessment Program; Ranking Methodology for CANDU Nuclear Generating Station Concrete Components | "K. Philipose, C. Seni (AECL), P. Mukherjee, E. McColm (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Evaluation of Nuclear Power Plant Concrete to Maintain Continued Service | "E. McColm, P. Mukherjee, J. Sato, J. Kraznai (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Implementation of Environmental Qualification Program in Pickering | N. Mitchell (OH) | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Environmental Qualification Testing of TFE Valve Components | "A. Eyvindson, J. Aikin (AECL), W. Krasinski, R. McCutcheon (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | Steam Generator Cleaning Campaigns at Bruce A: 1993-96 | "F. Puzzuoli, P. Leinonen, G. Lowe, B. Murchie (OH)" | Toronto |
| 4th International CANDU Maintenance Conference | 1997 | B&W/FTI High Temperature Chemical Cleaning Process | "J. Jevec (McDermott Technology), W. Schneider (BW), J. Remarks (Framatome Technologies)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Innovation In Pressure Tube Life Assessment | "B. Guler, D. Kalenchuk, A. Celovsky (AECL)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Development Of A Finite Element Modal Model For A CANDU Fuel Channel | "J. Park, BS. Kim, JH. Lee, GY. Park (KAERI), CJ. Kim (KHNP)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Combined Electrolysis And Catalytic Exchange (CECE) Technology - An Economical Alternative For Heavy Water Upgraders Using Water Distillation | "D. Ryland, R. Sadhankar (AECL)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Catalytic Removal Of Dissolved Oxygen For Nuclear And Non-Nuclear Applications | "S. Suppiah, D. Burns, C. Aelick (AECL)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | ECCS Strainers - From Design To Installation | "D. Rhodes, A. Eyvindson, N. Fisher (AECL), A. Criminisi (OPG)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Improved Station Performance Through The Use Of Sub-Micron Filters | "W. Walker (Pall Canada), D. Guzonas (AECL), G. Svarovsky (OPG)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Steam Generator Life Management | "P. King, R. McGillivray, W. Reinhart, J. Millman, B. King (BWC)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Steam Generator Return To Service Following Extended Layup | "J. Sherin (BP), R. Tapping, S. Roy (AECL)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Maintenance And Life Management Of Steam Generators At EMBALSE Nuclear Power Station | "R. Sainz, G. Diaz, H. Sveruga (NASA), T. Ramakrishnan, S. Azeez (AECL)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Fuel Channel Diameter Creep Measurement Using A Modified Slarette Tool | "G. Rousseau, J. Bherer, C. Tremblay, M. Drouin (HQ)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Hydro-Quebec MED (Diametric Expansion Measurement) | "J. Bherer, C. Tremblay (HQ)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Tools For Computer-Assisted Analysis Of Fuel Channel Inspection Data | "T. Joulin, D. Horn, T. Krause, K. Chaplin, D. Dunford, E. Long (AECL)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | "Program Strategies For Maintenance Management, Organization & Planning" | J. Czegeny (OPG) | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Nuclear Maintenance Work Volume Model | M. Thibeault (OPG) | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Pickering A - Ontario Power Generation Rotating Equipment PDM Integrated Reporting | "K. Slater, P. Reitknecht (OPG)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Innovation to Reality For Improved Pump Seal Performance | "W. Wong, A Eyvindson, D. Rhodes (AECL)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Inflatable Airlock Door Seals For Improved Performance | "T. Sykes, K. Weisenberg, R.Yeung, F. Briscoe (AECL)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Development Of Ultrasonic Techniques For Feeder Cracking Inspection At Gentilly-2 | "G. Rousseau, J. Cote, G. Lepage, E. Lavoie (HQ)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | On The Development Of The Metar Family Of Inspection Tools | "E. Lavoie, G. Rousseau, L. Reynaud (HQ)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Implementation Of Advanced Spacer Detection And High Accuracy Gap On SLAR | "T. Krause, J. Schankula, T. Joulin, S. Craig (AECL)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Fuel Channel Inspection With AFCIS | "W. Mayo, G. Van Drunen, D. Kalenchuk, R. Gunn (AECL)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Modification Of Gentilly-2 Slarette Inspection System For Delivering OPG∆s ANDE Inspection Tools | "M. Cantin, G. Rousseau, J. Bherer (HQ), J. Drossis, G. Jarvis (OPG)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Using Systematic Aging Assessments To Improve Effectiveness Of Plant Maintenance Programs | "R. Dam, P. Watson, J. Yang, J. Nickerson (AECL)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Challenges of Adolescent and Maturing Nuclear Plants: A Chemistry Perspective On Maintenance & Outages | J. Roberts (BP) | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Maintenance Optimization At Bruce Power | "K. Ellis, R. Tout (BP)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Cernavoda NPP Plant Life Management (PLiM) Program | "V. Serban, L. Delcea (SNN Romania)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Refurbishment Programs | C. Irish (Nuclear Logistics) | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Benefits Of A Systematic Approach To Maintenance For Safety And Safety-Related Systems | "R. Dam, S. Ayazzudin, J. Nickerson (AECL)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Overview Of Feeder Issues | T. Gendron (AECL) | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Evaluation Of Options For Life Cycle Management Of Feeder Cracking At The Point Lepreau Generating Station | "T. Gendron (AECL), J. Slade (NBP)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Use Of Depleted Fuel As A Mitigation Method For Reducing FAC In Selected Channels | "G. Rousseau, D. Brissette (HQ)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Assessment Of CANDU Feeders Subject To Flow Accelerated Corrosion | "S. Iyer (AECL), J. Slade (NBP)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Remaining Life Assessment Of Pickering A Primary Heat Transport Outlet Feeder Elbows | "W. Lee, T. Lau, P. Floyd (OPG), C. Schefski (AECL)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Light Water In-Reactor Loop Experiments To Support A CANDU HTS pHa Specification For Minimizing Feeder Wall Thinning | "A. Elliot, M. Godin, Z. Walker (AECL)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Hardfacing And Packings For Improved Valve Performance | "J. Aikin, J. Patrick, I. Inglis (AECL)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Alternative Packing Solutions For Manual And Modulating Valves | W. Igel (LATTY International) | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | New Developments In Valve Stem Sealing | W. Igel (LATTY International) | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Overview Of Eddy Current Inspection Technology For CANDU SG Tubing | "L. Obrutsky, M. Mirzai (AECL)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Advances In Analysis Of Eddy-Current Data From Steam Generator Inspections | "D. Horn, R. Roiha, J. Lu (AECL)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Pre-Service Baseline Inspection Using X-Probe of Oconee Replacement Steam Generators | "M. Addario, P. Shipp (BWC), K. Davis (Duke Energy), C. Fogal (R/D Tech)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | I&C Upgrading At Nuclear Power Plants | A. Tamiri (OPG) | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Testing The Dynamics Of Shutdown Systems Instrumentation In Reactor Trip Measurements | O. Glockler (OPG) | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Electrical And C&I Maintenance At Cernavoda NPP | "S.Hada, S.Voiculescu, D. Bigu (SNN Romania)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Design Of The Bruce And Darlington Universal Delivery Machine Heads | "M. Gray (GEC), R. Brown (OPG)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Pickering UDM Transportation System | "P. Brennan, J. Vissers (GEC), R. Brown (OPG)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Digital Motion Control For Ontario Power Generation∆s Universal Delivery Machine | "D. Murray (GEC), A. Roberts (OPG)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Shutdown Cooling Heat Exchanger Leak Found By X-Probe | "M. Cantin (HQ), R. Lakhan (RD Tech)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Recent Applications Of Phased Array Inspection For Turbine Components And Welded Structures | "P. Ciorau, D. MacGillivray, R. Hanson (OPG)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Identification And Management Of Cracking In 410 Stainless Turbine Blade Roots | "M. Clark, E. Lehockey, I. Thompson, R. Massey (Kinectrics)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Steam Generator Thermal Sleeve Reconstruction | "E. Caton, A. Askari, P. Volder (BWC)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | "Steam Generator Modifications And Repairs At Wolsong, Cernavoda, & Qinshan" | "J. Vandenberg, R. Kizhatil, P. Caple (BWC)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Auxiliary U-Bend Support Retrofit | "B. Horvath, S. Fluit, R. Kizhatil (BWC)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Mechanism Of Crud Migration Into The Fuelling Machine And Its Effects | T. Sie (OPG) | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Darlington Nuclear Fuelling Machine System Monitoring | T. Sie (OPG) | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Fouling Issues Within CANDU Fuel Bay Purification Systems | "P. Angell (AECL), J. Murray (OPG)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Reactor Inspection & Maintenance Machine Senses And Homes In On Reactor End Fittings - Summary | "R. Fell (GEC), R. Brown (OPG)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Feeder Hub Refurbishment To Reduce D2O Leakage | "B. Smith, H. de Boer, A. Duerden, D. Benton (AECL), O. Lepik (OPG)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Pickering A Steam Generators - Inspection Of Boiler Feedwater Nozzles And Thermal Sleeves | "C. Schefski (AECL), P. Floyd, T. Lau (OPG)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Tube To U-Bend Support Bar In-Situ Clearance Measurement | "P. Shipp, R. Klarner, W. Schneider, M. Addario (BWC)" | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | Review Of Failures Of Recirculating Steam Generator Internals Due To Flow-Accelerated Corrosion | J. Pietralik (AECL) | Toronto |
| 6th International CANDU Maintenance Conference | 2003 | A Technique To Infer Steam Generator Fouling Factors From Tube Deposit Loading | "M. Yetisir, S. Laroche, C. Turner (AECL)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Implementing a Customer Focused Continual Business Improvement Program to Improve the Maintenance Process | "G. Kharshafdjian, C. Fisher, T. Beres, S. Brooks, S. Forbes, M. Krause, K. Mcauley, M. Wendorf (AECL)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Leading the Pickering A Return to Service Project Through Effective Information Management and Performance Reporting | H. Sherwood (OPG) | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Preserving EQ as Per CSA N290.13: EQ of Equipment for CANDU NPP | H. Bordeleau (H. Bordeleau Services) | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Assisting Maintenance in Sustaining Environmental Qualification | L. Boville (BP) | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Local Effects in Flow-Accelerated Corrosion Wall Thinning | John Pietralik (AECL) | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Conditions of Feeders at Embalse Nuclear Generating Station | "C. Schiersman, R. Sainz (Nucleoelectrica Argentina S.A.), T.K. Ramakrishnan, J.Q. Howieson (AECL)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Fuel Channel Life Monitoring | "B. Guler, E. Harmer, M.Echlin, A. Celovsky (AECL)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | In-Service Inspection System for Coolant Channels of Indian PHWRs - Evolution and Experience | "R. Puri, M. Singh (BARC)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | The Feasibility Study of Using Deuterated Gadolinium Nitrate for Moderator-Poisoned Shutdown and Excess Reactivity Control in CANDU Reactors | "J. Li, A. Everatt (AECL)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | "Maintenance, Outages and Chemistry Really Can Be Compatible" | "J. Roberts, R. Deaconescu (BP)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | An Assessment of the Use of AECL's Wetproofed Recombiner Catalyst for the Moderator Cover Gas System in CANDUs | S. Suppiah (AECL) | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Preventive Maintenance and Periodic Testing Program Optimization of Emergency Diesel Generator | "R. Vaillancourt, M. Croteau, M. Drouin (HQ)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | On-Site Refurbishment of Electrical Equipment - Battery Charger Example | C. Irish (NLI) | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Strategies for Ensuring Reliability of Electric Motors | M. Radulski (Schulz Electric Company) | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Qualification of a Motorized Scanner for Feeder Bend Inspection | "P. Martin (NBP), G. Rousseau (HQ), E. Lavoie (HQ-IRN)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Feeder Elbow Replacement at Pickering A | "D. Pink, A. Lopez (BWC), E. Tang, C. Liew (AECL), W. Lee, J. Bouchi (OPG)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Eddy Currents Inspection of CANDU Steam Generator Tubes Using Zetec∆s ZR-1 Robot: Experience in Romania | "S. Hower (Zetec Inc.), M. Serban (CNE-Prod), L. Vladu (COMPCONTROLING)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Overview of Magnetic Bias X-Probe Qualification and Inspection on PNGS Monel 400 Steam Generator Tubing | "B. Lepine (AECL), J. van Langen (OPG), L. Obrutsky (AECL)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Field Experience With Eddy Current X-Probes in CANDU Steam Generators and Heat Exchangers | "S. Sullivan, R. Lakhan, V. Cecco (Zetec Inc.)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Degraded Condition of the Reflux Tube Bundles in Pickering B | "C. Lorencez, D. Redden (OPG)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | High Heat Transport System Leakage to D2O Collection System | "C. Lorencez, D. Redden, P. Zvonar (OPG)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Wall Thinning of CANDU Large Bore Primary Heat Transport System Piping | "C. Schefski, J. Pietralik, Z. Walker (AECL), R. McAlister, O. Naeem (OPG), A. Guillermo (NBP)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Field Trial of ThermAND at PLGS | "G. Burton, G. McKay, M. Thompson, C. Turner (AECL), S. Robertson (NBP)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Preventive and Predictive Maintencance as a Function of Spare Part Management - A Point of View from a Procurement Specialist and a Supplier | "R. LaRose (AECL), P. Sloski (Seals Unlimited)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Condition Monitoring - A Key Component in the Preventive Maintenance | "C. Isar (SNN, NPP UI Cernavoda)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Crack Detection Tools for Feeder Inspection | "E. Lavoie E. Lavallee (HQ-IRN), G. Rousseau, J.F. Cote (HQ)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Eddy Current Array Probe for Detection of Surface Breaking Cracks in the Extrados of Feeder Bends | "L. Obrutsky, R. Cassidy, K. Chaplin (AECL), P. Martin (NBP), J. Bureau (Zetec Inc.)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Inspection of CANDU Feeder Pipes in Areas Adjacent to Welds | R. tenGrotenhuis (OPG) | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Steam Generator Tubesheet Waterlancing at Bruce B | "R. Persad (BWC), D. Eybergen (BP)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Steam Generator Secondary Side Chemical Cleaning at Gentilly-2 | S. Plante (HQ) | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Radiological Pathways Analysis for Spent Solvents from the Boiler Chemical Cleaning at the Pickering Nuclear Site | "N. Garisto, Z. Eslami (SENES Consultants Ltd.), S. Hodgins (OPG), T.A. Beaman (T.A. Beaman & Associates), S. von Svoboda, J. Marczak (OPG)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Inspection Program for Embalse Nuclear Generating Station | "J. Devegili, G. Diaz, C. Schiersman, R. Sainz (Nucleoclectrica Argentina SA), T. Ramakrishnan, J. Howieson (AECL)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Plant Life Management Processes and Practices for Heavy Water Reactors | "K-S. Kang, J. Cleveland, C. Clark (IAEA)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | "CANDU Life Cycle Management Workshop on ""HTS Aging Management""" | "P. Kundurpi, J. Nickerson, D. Meneley (AECL), J. Plourde (OPG)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Contribution to Detection and Sizing Linear Defects by Phased Array Ultrasonic Techniques | P. Ciorau (OPG) | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Improving Accuracy of ET Measurement of LISS Nozzle to Calandria Tube Clearance | "S. Craig, T. Krause, J. Schankula (AECL)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Reverse Engineering of 3-D Crack˚like EDM Notches and Phased Array Ultrasonic Results on Low-Pressure Turbine Components Mock-ups | "P. Ciorau (OPG), W. Daks, H. Smith (CAD Wire)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Innovation in Pressure Tube Rolled Joint Sampling (Circumferential Sampling Tool Technology) | "B. Guler, J. King, R. Wray (AECL)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Pressure Tube Replication Techniques Using the Advanced NDE System | "A. Isherwood, D Jarron, J. Travers, K. Hanley (AECL)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Advanced NDE (ANDE) and Its Application for Pressure Tube Inspections in OPG Reactors | "D. Jarron, M. Trelinksi, S. Kretz (OPG)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Measurement of Oxide Loadings within Steam Generator Tubes at CANDU Nuclear Stations | "A. Husain, J. Krasznai (Kinectrics)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | An Improved Ultrasonic Downcomer Flow-Measurement System for CANDU Steam Generators | "V. Janzen, B. Luloff (AECL), K. Sedman, G. Galan (BP)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Boiler Tube Support Plate Degradation in Bruce Unit 8 | "K. Sedman, G. Galan, B. Dicks (BP)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Preventive Maintenance Optimization at the Gentilly 2 NGS: Initial Results and Lessons Learned | "M. Darragi, D. Komljenovic, R. Vaillancourt, M. Croteau (HQ)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | """What Did You Learn from Your Maintenance Program Today?"" - A Living Maintenance Program at Bruce Power" | "I. Rowley (BP), E. Niemkiewicz (Insert Key Solutions, Inc.)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Pickering NGS A Reactor Building 1 Dome Refurbishment - Long-Term Monitoring of Coating | "J. Deans (Kinectrics), P. Chan, R. Gomme (OPG)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Bruce 'B' Primary Heat Transport Pump Containment Penetration Bellows Seal Replacement | D. Bhattacharyya (BP) | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Bruce B 2004 Vacuum Building Outage - Fiberglass Spray Header Refurbishment Program | M. Diebel (BP) | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Open Airlock Doors During Outages at Pickering B | "R. Russell, G. MacDonald, G. Clarke (OPG)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | TSS Tool Measurements in CANDU Reactors - Results and Issues | "L. Popescu (NSS), N. van den Brekel (OPG), A. Wallace (Kinectrics), L. Micuda (BP)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Advanced In-Fuel Channel Gauging Tool - Instrumenting a SLAR Tool for Dual Purpose | "G. Rousseau, M. Cantin (HQ), D. Champagne, S. Cecco (HQ-IRN)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Ultrasonic Device to Measure Gap Between Calandria Tube and LISS Nozzle | "T.R. Kim, S.M. Sohn, J.S. Lee (KEPRI)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Maintenance and Plugging Technology for CANDU Steam Generator Tubing | "J. Prince, A. Nicholson, J. Hare, L. McGoey, T. Stafford (OPG), P. Gowthorpe (INTECH International)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Identification of Leaky Steam Generators by Iodine Mapping Technique and Development of Tools for Cutting of Tubes of Steam Generators of Indian PHWRs | D. Rao (NPCIL) | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Steam Generator Primary Manway Modifications for Wolsong Unit #1 | "J. VandenBerg, P. Volder (BWC)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Maintenance Feedback - The Key to a Successful Integrated-Equipment Reliability Improvement Program (i-ERIP) | "J. Anderson, W. Pike (Anderson, Chavet & Anderson Inc.), T. Mairs (OnMarc Consulting Inc.), K. Hart (PPL Susquchanna SES), G. Polowy (Callaway NP), B. Coffey (FPL Turkey Point)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | GRA/RIAM Model Development at Darlington Nuclear | "J. Plourde (OPG), R. Parmar (NSS)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Effect of IX Column Maintenance on Carbon-14 Concentration in Moderator Systems | "C. Gallagher, A. Tripple (AECL)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Reducing Plant Radiation Fields by Source Term Reduction - Tracking Cobalt and Antimony to Their Sources at Gentilly-2 | "P. Gauthier (HQ), D. Guzonas (AECL)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Some Applications Related to the Structural Integrity Analyses of CANDU 6 Pressure Tubes | "V. Radu (Institute for Nuclear Research, Romania)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Generic Assessment of Tight Fitting Annulus Spacer Mobility | "J. Robertson (NSS), L. Micuda (BP), N. van den Brekel (OPG)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Economic Analysis for Upgrade Decision-Making Using a Control System Replacement Example | "J. de Grosbois, R. Wichman, G. Hepburn, R. Basso (AECL), V. Kumar, D. Deregowska (CU)" | Toronto |
| 7th International CANDU Maintenance Conference | 2005 | Unit 1 Return to Service - Experiences in Managing a $1 Billion Project | C. Pattison (OPG) | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Characteristics of Outage Radiation Fields Around Various Reactor Components | "Y. Verzilov, A. Husain, G. Corbin" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Rapid Deployment Platform for In-vault Reactor Maintenance | "L. Lancaster (GE-Hitachi Canada), M. Furniss (BP)" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | World Class ALARA Performance at Darlington Nuclear | T. Wong | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Improving Regulatory Oversight of Maintenance Programs | S. Cook | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Overdue PSV Reduction Program | "A. Beauchamp, M. Bagshaw, W. Blaedow" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | A Last look at Point Lepreau Feeder Degradation | J. Slade T. Gendron | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Feeder Replacement | "A. Askari, D. Pink (BWC), R. Goslin, R. Mallozzi (AECL)" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Gentilly-2 Heat Transport System Chemical Decontamination | J. Forest | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Impact of Shelf Life on Measured Prompt Fraction of Spare Inconel in Core Flux Detectors | "S. Sadeghi, V.K. Mohindra" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Mass Transfer Effects in Flow-Accelerated Corrosion Wall Thinning | J. Pietralik | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Delayed Hydride Cracking Velocity of Irradiated CANDU Zr-2.5Nb Tubes with Temperature and Neutron Fluence | Y. S. Kim | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Emergent Maintenance Issues Related to Point Lepreau Refurbishment | "J. Slade, T. Gendron" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Industry Partnership: Adding Value to Nuclear Reactor Refurbishment and Maintenance | "T. Gibbins, N. Bains" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | "Embalse Refurbishment - Aging, Safety Assessments and the Path Forward" | "D. Fornero, G. Diaz, R. Sainz, R. Gold, R. Dam, L. McCrea" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | "Solving the Challenge of Too Much Work, One Thin Vertical Slice at a Time" | J. Anderson | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | "Elective Maintenance Backlog Reduction at Darlington Nuclear, Ontario Power Generation" | "K. Sutton, G. Lanteigne" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Sustaining Improved Equipment Reliability in Fuel Handling at Darlington | B. Conners | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Bruce Unit 1 & 2 Preheater Condition Assessment | "P. King, R. McGillivray, D. Durance" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Underwater Inspection and Maintenance Programs within Nuclear and Non-nuclear Related Operating Systems | "B. Goulet, C. Vallance" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | The Steps to Executing Successful Maintenance Services | E Wilson (AECL) | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Stress Corrosion Cracking of Steam Generator Tubing During Unit Outages | "D. Durance, J.G. Roberts, P.J. Kingl, J. Gorman, R. Allen" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | A Survey on the Corrosion Susceptibility of Alloy 800 CANDU SG Tubing Materials | Y. Lu | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Spectral Effects on Stress Relaxation of Inconel X-750 Springs in CANDU Reactors | "M. Griffiths, F. Butcher (AECL), F. Garner, L. Greenwood" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | CANDU Power Plant Primary Heat Transport System Vacuum Drying | "B. Xu, Y. Hoang" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | The Development and Manufacture of Size for Size Feeder Pipe for Feeder Replacement | "G. Legate, D. Schreiter, N. Townley" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Remote Feeder Removal for CANDU 6 at Gentilly 2 | "E. Lavoie, A. Drolet, P. Gauthier" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | The Right Maintenance on the Right Components at the Right Time with the Right Parts. Maintaining High Plant Reliability through an Effective Maintenance Program | P. Von Hatten | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Motor-Operated Valve Performance Testing and Condition Monitoring Using Data from the Motor Control Centre | "F. Guerout, P. Lebel, K. Jones" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | "Designing for Maintainability: Use of Operating Experience and Feedback to Improve Performance of the ACR-1000, Detailing the Specific Case of Power Operated Valves" | D. McQuade | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Maintainability - A Means to Improve the Maintenance and Availability Performance of Nuclear Power Plants | "J. Krasnodebski, M. Grover" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Obtaining Third-Party CRNs for N285.0 Class 6 Components | G. Waterhouse | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | "AECL's Use of FMEA and OPEX for Field Service Tooling and Process Development, Implementation and Improvement: A Model for the Future" | "E., R. Dam E. Wilson" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Eddy Currents Inspection of Steam Generator Tubes at Cernavoda NPP | "L. Vladu, M. Cretu, M. Gologanu, S. Tromba" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Inspection of Circumferential IGA/SCC in Bruce Unit 4 SGs | "S. Fluit, H. Myderwyk, P. King, D. Durance, K. Sedman" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Hydro Quebec Adoption and Deployment of the Integrated Zetec Technology Platform | "M. Cantin, S. Faucher, C. Fogal, N. Cardillo" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Integrating Chemistry with Maintenance During CANDU Reactor Lay-Up For Retubing Outages | "C. Stuart, G. Burton, Erin Szumsky (AECL)" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Heavy Water Upgrader Improvements | "I. Bonnett, T. Busigin, G. Tucker, A. Lashford" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | A Technique for Assessing the Abrasion Resistance of Steam Generator Internal Tube Oxide | "V. Chew, C. Morton, A. Husain" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | A Markov Chain Model for CANDU Feeder Pipe Degradation | "S. Datla, K. Dinnie, A. Usmani, X. Yuan" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Reliability Analysis for Inspections of CANDU Components and Systems | D. Horn | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Probabilistic Assessment of Fuel Channel Bearing Travel and End of Bearing Time | "F. Camacho, R. Lam, J. Goldberg, L. Micuda, D. Cho" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | AECL's Advanced CANDU Reactor - Maintenance Based Design and Equipment Reliability | D. Meraw | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Flow-Induced Vibration & Fretting-Wear Specifications to Ensure Steam-Generator and Heat Exchanger Lifetime Performance | "V. Janzen (AECL), M. Pettigrew (EPM), Y. Han (AECL)" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Plasmabond: Soft-Metal Engineered Surfaces | S. Greenwell | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | High Resolution X-probe for 12.9 mm Diameter I600 Tubing | "J. Renaud, L. Obrutsky, R. Lakhan" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | The Effects of ID Magnetite Deposits on Steam Generator Tube Eddy Current Signals | "B. Lepine, L. Obrutsky" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Video Inspection of Lattice Tube Rolled Joint Area with Structured Lighting for Enhanced Surface Profiling | "P.A. Rochefort, M. Bouchard, A. Kittmer, M. King" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | A Study of an Intelligent FME System for SFCR Tools | H. Hassan | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Utilization of Handheld Computing to Trend Improvements in Compliance | "G. Galvin, A. Haines, J. Rasmussen" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Remote Tool Monitoring System | "J. Cherevaty, C. Rambaran, S.A Cheong" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Development of Risk-Informed In-Service Inspection Methodology for Piping in CANDU Nuclear Power Plants | "A. Yuan, B. Hryciw, K. Dinnie, A. Usmani" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Case Studies in Root Cause Analysis: Opportunities for Improved Maintenance of CANDU Fuelling Machines | "K. Ellison, M. Schippke, A. Jarvine, K. Pickles" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | A Method for CT-LIN Time-to-Contact Predictions in CANDU 6 Reactors | "P. Sedran, B. Rankin" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Development of Methods for Detection and Repositioning of Snug-Fitting Annulus Spacers | "A. Feenstra, B. A.W. Smith, M. King" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Management of Component Fatigue in CANDU Stations for Life Extension | "G. Stevens, M. Yetisir, J. Slade, S. Robertson" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Hydraulic Nuts (HYDRANUTS) for Critical Bolted Joints | S. Greenwell | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Fret Replica Inspection Laser Scanner (FRILS) | "S. Kretz, K. Hanley" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | A Review of Digital Radiography Technology for Valve Inspection | "K. Stoev, F. Guerout, D. Horn" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Phased Array Ultrasonic Technology (PAUT) Contribution to Detection and Sizing of Microbially Influenced Corrosion (MIC) of Service Water Systems and Shut Down Coolers Heat Exchangers in OPG CANDU Stations | "P. Ciorau, L. Pullia, T. Hazelton, W. Daks" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Software Simulation Development: Best Practices and Lessons Learned | "B. Sze, F. Tong, J. Wang, G. Rigway" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Fatigue Analysis Through Automated Cycle Counting using ThermAND | "G. Burton, Y. Ding, A. Scovil, M. Yetisir" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | PIPO-FE: An Updated Computer Code to Evaluate Heat Exchanger Flow-Induced Vibration | "Y. Han, V. Janzen (AECL)" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Predictions of the Onset Times for Spacer Nip-Up in Point Lepreau | "P. Sedran, B. Rankin" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | A Tool for the Removal and Storage of Horizontal In-core Flux Detectors | "E. Choi, F. Forrest, N. Persaud" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Hydro-Qu?bec Inspection Robot RIT-LRG | "D. Champagne, Y.G. Bourgault" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Darlington TMM | P. Brennan | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Advanced Robotics for Inspection and Maintenance Applications | "B. Fisher, M. Toffolon, J. Hulcoop" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Development of Non-Destructive Condition Monitoring Techniques for Low-Voltage Cables | "F. Guerout, L. Cisse, R. Boor, A. Blouin" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | A Contribution to Phased Array Ultrasonic Inspection of Welds: Defect Patterns and Sizing Capability | P. Ciorau | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | SI - Dresden Service Water Engineering Evaluations and G-Scan Inspections | "K. Rach, G. Licina" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Damaged to Moderator Heat Exchanger Tubesheet Face | "S. Valois, D. Hartwick" | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | FEA Calculation of the Plastic Limit Load of Locally Thinned Pipe Bends | U. Abdelsalam | Toronto |
| 8th International CANDU Maintenance Conference | 2008 | Optimization of Weld Overlay Dimensions for Butt-Welded Pipes | "A. Miessi, F. Ku, A. Chintapalli, R. Yee" | Toronto |